ACI WT2630 Wireless Sensor

The mesh network Series 2000 WT2630 is a battery operated spread spectrum wireless wall temperature sensor or thermostat. The override button (B & C models only) located on the side of the sensor housing can be assigned to a digital output in the Series 2000 family of receivers for occupancy override or similar applications. The setpoint adjustment (B Model only) can be assigned to an analog output in the Series 2000 receiver. The output will then be used by a controller for a variety of control setpoint ranges (user defined) and other applications such as dimming of light and window blinds control. Series 2000 SENSORS;SENSORS/WIRELESS SENSORS utilize reliable Spread Spectrum Radio technology. They can be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing installation labor risks. The Series 2000 sensor Data-Link LED confirms the data transmission was received by the receiver for fast and reliable positioning of the sensor during installation. There is no need for special wireless installation equipment or survey tools. Together with the Series 2000 receivers and controllers , the SENSORS;SENSORS/WIRELESS SENSORS can be used with any LON, BacNet, MODbus, or DDC control system or panel. The maximum radio transmission distance is dependent on building type. The maximum open- air transmission distance is one mile. In a typical commercial building with steel I-beam construction, concrete floors with reinforcing rod, and metal stud walls, it can be expected that transmissions will penetrate vertically through floors and horizontally through 200 to 500 feet of walls, furniture and air. The WT2630 is covered by ACI's Two (2) Year Limited Warranty, which is located in the front of ACI'S SENSORS & TRANSMITTERS CATALOG or can be found on ACI's web site, which is: www.workaci.com.

    View/Download ACI Spec Sheet