<![CDATA[Lectro Components: New Products - Sensor Interface Devices]]> https://www.lectrocomponents.com Wed, 08 Apr 2026 21:18:54 +0000 <![CDATA[ACI TOB Sensor Interface Device]]> https://www.lectrocomponents.com/aci-tob-sensor-interface-device Fri, 14 Nov 2014 17:52:43 +0000 https://www.lectrocomponents.com/aci-tob-sensor-interface-device ACI | TOB | Sensor Interface Device | Lectro ComponentsThe TOB will accept up to two separate signals from up to two AC TRIAC outputs, or DC sources, and provide up to two TRIAC outputs each capable of driving a 2.5A load. Each output TRIAC is activated for the time that the signal is applied to the input. The TOB provides isolation between the input ..

Price: $34.00

]]> ACI | TOB | Sensor Interface Device | Lectro ComponentsThe TOB will accept up to two separate signals from up to two AC TRIAC outputs, or DC sources, and provide up to two TRIAC outputs each capable of driving a 2.5A load. Each output TRIAC is activated for the time that the signal is applied to the input. The TOB provides isolation between the input ..

Price: $34.00

]]> <![CDATA[ACI PXP3 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pxp3-sensor-interface-device Fri, 14 Nov 2014 17:52:32 +0000 https://www.lectrocomponents.com/aci-pxp3-sensor-interface-device ACI | PXP3 | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $86.11

]]> ACI | PXP3 | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $86.11

]]> <![CDATA[ACI PXP2.3G Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pxp2-3g-sensor-interface-device Fri, 14 Nov 2014 17:52:31 +0000 https://www.lectrocomponents.com/aci-pxp2-3g-sensor-interface-device ACI | PXP2.3G | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $219.64

]]> ACI | PXP2.3G | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $219.64

]]> <![CDATA[ACI PXP2.3 FSG Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pxp2-3-fsg-sensor-interface-device Fri, 14 Nov 2014 17:52:30 +0000 https://www.lectrocomponents.com/aci-pxp2-3-fsg-sensor-interface-device ACI | PXP2.3 FSG | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $255.56

]]> ACI | PXP2.3 FSG | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $255.56

]]> <![CDATA[ACI PXP2.3 FS Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pxp2-3-fs-sensor-interface-device Fri, 14 Nov 2014 17:52:29 +0000 https://www.lectrocomponents.com/aci-pxp2-3-fs-sensor-interface-device ACI | PXP2.3 FS | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $247.22

]]> ACI | PXP2.3 FS | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $247.22

]]> <![CDATA[ACI PXP2.3 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pxp2-3-sensor-interface-device Fri, 14 Nov 2014 17:52:29 +0000 https://www.lectrocomponents.com/aci-pxp2-3-sensor-interface-device ACI | PXP2.3 | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $204.37

]]> ACI | PXP2.3 | Sensor Interface Device | Lectro ComponentsThe PXP*.3 is an electric to pneumatic transducer which converts an analog electrical input signal to a proportional pneumatic output. The PXP*.3 will automatically modulate its control valve(s) to regulate the branch line pressure to the selected set point as determined by the input signal. The P..

Price: $204.37

]]> <![CDATA[ACI PTP-G Sensor Interface Device]]> https://www.lectrocomponents.com/aci-ptp-g-sensor-interface-device Fri, 14 Nov 2014 17:52:26 +0000 https://www.lectrocomponents.com/aci-ptp-g-sensor-interface-device ACI | PTP-G | Sensor Interface Device | Lectro ComponentsThree models of the PTP accept either a 3 to 15, 3 to 30, or 0 to minus 7.5 psig pneumatic pressure input and convert it to one of four proportional analog output ranges of 1-5, 2-10, 3-15 VDC or 4-20 mA which are jumper shunt selectable. PTP is a positive current output device that is fully tempe..

Price: $63.89

]]> ACI | PTP-G | Sensor Interface Device | Lectro ComponentsThree models of the PTP accept either a 3 to 15, 3 to 30, or 0 to minus 7.5 psig pneumatic pressure input and convert it to one of four proportional analog output ranges of 1-5, 2-10, 3-15 VDC or 4-20 mA which are jumper shunt selectable. PTP is a positive current output device that is fully tempe..

Price: $63.89

]]> <![CDATA[ACI PTP100 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-ptp100-sensor-interface-device Fri, 14 Nov 2014 17:52:26 +0000 https://www.lectrocomponents.com/aci-ptp100-sensor-interface-device Price: $122.22

]]> Price: $122.22

]]> <![CDATA[ACI PTP Sensor Interface Device]]> https://www.lectrocomponents.com/aci-ptp-sensor-interface-device Fri, 14 Nov 2014 17:52:26 +0000 https://www.lectrocomponents.com/aci-ptp-sensor-interface-device ACI | PTP | Sensor Interface Device | Lectro ComponentsThree models of the PTP accept either a 3 to 15, 3 to 30, or 0 to minus 7.5 psig pneumatic pressure input and convert it to one of four proportional analog output ranges of 1-5, 2-10, 3-15 VDC or 4-20 mA which are jumper shunt selectable. PTP is a positive current output device that is fully tempe..

Price: $55.56

]]> ACI | PTP | Sensor Interface Device | Lectro ComponentsThree models of the PTP accept either a 3 to 15, 3 to 30, or 0 to minus 7.5 psig pneumatic pressure input and convert it to one of four proportional analog output ranges of 1-5, 2-10, 3-15 VDC or 4-20 mA which are jumper shunt selectable. PTP is a positive current output device that is fully tempe..

Price: $55.56

]]> <![CDATA[ACI PTA2 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pta2-sensor-interface-device Fri, 14 Nov 2014 17:52:25 +0000 https://www.lectrocomponents.com/aci-pta2-sensor-interface-device ACI | PTA2 | Sensor Interface Device | Lectro ComponentsA timed contact or solid state closure from the controlling microprocessor controller is converted to a linear analog output with 255 steps of resolution. The last output signal is held until the PTA2 receives the end of the next pulsed input signal. The PTA2 will not wrap around if an excessively..

Price: $51.67

]]> ACI | PTA2 | Sensor Interface Device | Lectro ComponentsA timed contact or solid state closure from the controlling microprocessor controller is converted to a linear analog output with 255 steps of resolution. The last output signal is held until the PTA2 receives the end of the next pulsed input signal. The PTA2 will not wrap around if an excessively..

Price: $51.67

]]> <![CDATA[ACI PTA (PTA Digital Pulse Input to Analog Output) Sensor Interface Device]]> https://www.lectrocomponents.com/aci-pta-pta-digital-pulse-input-to-analog-output-sensor-interface-device Fri, 14 Nov 2014 17:52:25 +0000 https://www.lectrocomponents.com/aci-pta-pta-digital-pulse-input-to-analog-output-sensor-interface-device ACI | PTA (PTA Digital Pulse Input to Analog Output) | Sensor Interface Device | Lectro ComponentsThe PTA converts a single pulse-width modulated input to an analog current or voltage output. There are two LED indicators that designate power and signal . A timed contact or solid state closure from the controlling microprocessor controller is converted to a linear analog output signal with 256 ..

Price: $65.56

]]> ACI | PTA (PTA Digital Pulse Input to Analog Output) | Sensor Interface Device | Lectro ComponentsThe PTA converts a single pulse-width modulated input to an analog current or voltage output. There are two LED indicators that designate power and signal . A timed contact or solid state closure from the controlling microprocessor controller is converted to a linear analog output signal with 256 ..

Price: $65.56

]]> <![CDATA[ACI PSG Sensor Interface Device]]> https://www.lectrocomponents.com/aci-psg-sensor-interface-device Fri, 14 Nov 2014 17:52:23 +0000 https://www.lectrocomponents.com/aci-psg-sensor-interface-device ACI | PSG | Sensor Interface Device | Lectro ComponentsThe PSG is a hand held programmable signal generator designed to simulate analog or pulse signals from controllers, sensors, and other building automation system components. It is designed as an aid to speed up the process of system setup and calibration. PSG is equipped with a removable cable wit..

Price: $291.67

]]> ACI | PSG | Sensor Interface Device | Lectro ComponentsThe PSG is a hand held programmable signal generator designed to simulate analog or pulse signals from controllers, sensors, and other building automation system components. It is designed as an aid to speed up the process of system setup and calibration. PSG is equipped with a removable cable wit..

Price: $291.67

]]> <![CDATA[ACI PHOTON4.1 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-photon4-1-sensor-interface-device Fri, 14 Nov 2014 17:52:22 +0000 https://www.lectrocomponents.com/aci-photon4-1-sensor-interface-device ACI | PHOTON4.1 | Sensor Interface Device | Lectro ComponentsThe PHOTON4.1 interface has 4 outputs capable of controlling G.E.? RR7 or RR9 relay types (up to 10 per output) or Schlage Electronics or TOUCH-PLATE? 3000-PL relay type lighting contactors. It provides the necessary latch and unlatch pulses required by these contactors. Up to 255* PHOTON4.1s can ..

Price: $106.11

]]> ACI | PHOTON4.1 | Sensor Interface Device | Lectro ComponentsThe PHOTON4.1 interface has 4 outputs capable of controlling G.E.? RR7 or RR9 relay types (up to 10 per output) or Schlage Electronics or TOUCH-PLATE? 3000-PL relay type lighting contactors. It provides the necessary latch and unlatch pulses required by these contactors. Up to 255* PHOTON4.1s can ..

Price: $106.11

]]> <![CDATA[ACI MPOE Sensor Interface Device]]> https://www.lectrocomponents.com/aci-mpoe-sensor-interface-device Fri, 14 Nov 2014 17:52:20 +0000 https://www.lectrocomponents.com/aci-mpoe-sensor-interface-device ACI | MPOE | Sensor Interface Device | Lectro ComponentsThe MPOE is a switch selectable electrically operated manual override. It is designed to be installed between a pneumatic signal transducer and the actuator. It can be used with any HVAC Control System or Building Automation Control System. MPOE output power is the same as the power supply and is ..

Price: $166.67

]]> ACI | MPOE | Sensor Interface Device | Lectro ComponentsThe MPOE is a switch selectable electrically operated manual override. It is designed to be installed between a pneumatic signal transducer and the actuator. It can be used with any HVAC Control System or Building Automation Control System. MPOE output power is the same as the power supply and is ..

Price: $166.67

]]> <![CDATA[ACI MAO Sensor Interface Device]]> https://www.lectrocomponents.com/aci-mao-sensor-interface-device Fri, 14 Nov 2014 17:52:18 +0000 https://www.lectrocomponents.com/aci-mao-sensor-interface-device ACI | MAO | Sensor Interface Device | Lectro ComponentsThe MAO installs between a controller and an actuator to provide adjustable analog manual override when needed. In normal operation two (2) analog signals route from the controller through the MAO to each actuator. Flip the override switch from automatic to manual on either MAO output and vary the..

Price: $58.33

]]> ACI | MAO | Sensor Interface Device | Lectro ComponentsThe MAO installs between a controller and an actuator to provide adjustable analog manual override when needed. In normal operation two (2) analog signals route from the controller through the MAO to each actuator. Flip the override switch from automatic to manual on either MAO output and vary the..

Price: $58.33

]]> <![CDATA[ACI EPWG Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epwg-sensor-interface-device Fri, 14 Nov 2014 17:52:14 +0000 https://www.lectrocomponents.com/aci-epwg-sensor-interface-device ACI | EPWG | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $118.00

]]> ACI | EPWG | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $118.00

]]> <![CDATA[ACI EPW2G Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epw2g-sensor-interface-device Fri, 14 Nov 2014 17:52:13 +0000 https://www.lectrocomponents.com/aci-epw2g-sensor-interface-device ACI | EPW2G | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $407.56

]]> ACI | EPW2G | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $407.56

]]> <![CDATA[ACI EPW2 FS-G Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epw2-fs-g-sensor-interface-device Fri, 14 Nov 2014 17:52:13 +0000 https://www.lectrocomponents.com/aci-epw2-fs-g-sensor-interface-device ACI | EPW2 FS-G | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $158.33

]]> ACI | EPW2 FS-G | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $158.33

]]> <![CDATA[ACI EPW2FS Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epw2fs-sensor-interface-device Fri, 14 Nov 2014 17:52:13 +0000 https://www.lectrocomponents.com/aci-epw2fs-sensor-interface-device ACI | EPW2FS | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $150.00

]]> ACI | EPW2FS | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $150.00

]]> <![CDATA[ACI EPW2 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epw2-sensor-interface-device Fri, 14 Nov 2014 17:52:12 +0000 https://www.lectrocomponents.com/aci-epw2-sensor-interface-device ACI | EPW2 | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $202.65

]]> ACI | EPW2 | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $202.65

]]> <![CDATA[ACI EPW Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epw-sensor-interface-device Fri, 14 Nov 2014 17:52:12 +0000 https://www.lectrocomponents.com/aci-epw-sensor-interface-device ACI | EPW | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $112.22

]]> ACI | EPW | Sensor Interface Device | Lectro ComponentsThe EPW* converts a pulse, phase cut, or digital PWM signal into a proportional pneumatic signal ranging from 0 to 20 psig. The pneumatic output is proportional to the signal input, either direct or reverse acting. The EPW* has a manual override potentiometer to vary the pneumatic output and two L..

Price: $112.22

]]> <![CDATA[ACI EPCG Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epcg-sensor-interface-device Fri, 14 Nov 2014 17:52:12 +0000 https://www.lectrocomponents.com/aci-epcg-sensor-interface-device ACI | EPCG | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $175.00

]]> ACI | EPCG | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $175.00

]]> <![CDATA[ACI EPC2G Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epc2g-sensor-interface-device Fri, 14 Nov 2014 17:52:11 +0000 https://www.lectrocomponents.com/aci-epc2g-sensor-interface-device ACI | EPC2G | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $181.82

]]> ACI | EPC2G | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $181.82

]]> <![CDATA[ACI EPC2 FS-G Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epc2-fs-g-sensor-interface-device Fri, 14 Nov 2014 17:52:11 +0000 https://www.lectrocomponents.com/aci-epc2-fs-g-sensor-interface-device ACI | EPC2 FS-G | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $150.00

]]> ACI | EPC2 FS-G | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $150.00

]]> <![CDATA[ACI EPC2 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epc2-sensor-interface-device Fri, 14 Nov 2014 17:52:09 +0000 https://www.lectrocomponents.com/aci-epc2-sensor-interface-device ACI | EPC2 | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $115.56

]]> ACI | EPC2 | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $115.56

]]> <![CDATA[ACI EPC Sensor Interface Device]]> https://www.lectrocomponents.com/aci-epc-sensor-interface-device Fri, 14 Nov 2014 17:52:09 +0000 https://www.lectrocomponents.com/aci-epc-sensor-interface-device ACI | EPC | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $97.22

]]> ACI | EPC | Sensor Interface Device | Lectro ComponentsThe EPC* is an electric to pneumatic transducer which converts an analog input signal to a proportional pneumatic output, modulating its control valve(s) to regulate the branch line pressure to the set point determined by the input signal. The EPC* offers four selectable input ranges of 0 to 5, 0 ..

Price: $97.22

]]> <![CDATA[ACI EFP Sensor Interface Device]]> https://www.lectrocomponents.com/aci-efp-sensor-interface-device Fri, 14 Nov 2014 17:52:07 +0000 https://www.lectrocomponents.com/aci-efp-sensor-interface-device ACI | EFP | Sensor Interface Device | Lectro ComponentsProportional pneumatic signal ranging from 0-20 psig. The pneumatic output is proportional to the signal input. The EFP* has a manual override switch with terminal strip contacts to indicate its status and a potentiometer to vary the pneumatic output. Two LEDs indicate UP or DOWN excursions, with ..

Price: $113.89

]]> ACI | EFP | Sensor Interface Device | Lectro ComponentsProportional pneumatic signal ranging from 0-20 psig. The pneumatic output is proportional to the signal input. The EFP* has a manual override switch with terminal strip contacts to indicate its status and a potentiometer to vary the pneumatic output. Two LEDs indicate UP or DOWN excursions, with ..

Price: $113.89

]]> <![CDATA[ACI DRN4 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-drn4-sensor-interface-device Fri, 14 Nov 2014 17:52:06 +0000 https://www.lectrocomponents.com/aci-drn4-sensor-interface-device ACI | DRN4 | Sensor Interface Device | Lectro ComponentsThe DRN4 is a resistive output motor actuator interface that accepts several types of DDC system signals. The DRN4 output is 0 to 135 ohms. The input signal types are field selectable by an 8-position DIP switch. Signal input selections include voltage, current, pulse and floating point. Voltage i..

Price: $283.64

]]> ACI | DRN4 | Sensor Interface Device | Lectro ComponentsThe DRN4 is a resistive output motor actuator interface that accepts several types of DDC system signals. The DRN4 output is 0 to 135 ohms. The input signal types are field selectable by an 8-position DIP switch. Signal input selections include voltage, current, pulse and floating point. Voltage i..

Price: $283.64

]]> <![CDATA[ACI DRN3.1 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-drn3-1-sensor-interface-device Fri, 14 Nov 2014 17:52:04 +0000 https://www.lectrocomponents.com/aci-drn3-1-sensor-interface-device ACI | DRN3.1 | Sensor Interface Device | Lectro ComponentsThe DRN3.1 is an interface that allows microprocessor control of a variable resistance. The DRN3.1’s isolated resistor network can be controlled by several different DDC signal types. It directly replaces a variable resistance controller and simulates the action of a slide wire or rotary potentiom..

Price: $151.11

]]> ACI | DRN3.1 | Sensor Interface Device | Lectro ComponentsThe DRN3.1 is an interface that allows microprocessor control of a variable resistance. The DRN3.1’s isolated resistor network can be controlled by several different DDC signal types. It directly replaces a variable resistance controller and simulates the action of a slide wire or rotary potentiom..

Price: $151.11

]]> <![CDATA[ACI DRC Sensor Interface Device]]> https://www.lectrocomponents.com/aci-drc-sensor-interface-device Fri, 14 Nov 2014 17:52:04 +0000 https://www.lectrocomponents.com/aci-drc-sensor-interface-device ACI | DRC | Sensor Interface Device | Lectro ComponentsThe DRC DIN rail adapter kit consists of two flexible plastic DIN rail clips and an adhesive backed foam "stop". Most ACT products are supplied with a snaptrack having prepunched holes to accomodate the DRC clips. The stems on the clips fit into the prepunched holes in the snaptrack and have flex..

Price: $4.72

]]> ACI | DRC | Sensor Interface Device | Lectro ComponentsThe DRC DIN rail adapter kit consists of two flexible plastic DIN rail clips and an adhesive backed foam "stop". Most ACT products are supplied with a snaptrack having prepunched holes to accomodate the DRC clips. The stems on the clips fit into the prepunched holes in the snaptrack and have flex..

Price: $4.72

]]> <![CDATA[ACI DMUX-8J Sensor Interface Device]]> https://www.lectrocomponents.com/aci-dmux-8j-sensor-interface-device Fri, 14 Nov 2014 17:52:03 +0000 https://www.lectrocomponents.com/aci-dmux-8j-sensor-interface-device ACI | DMUX-8J | Sensor Interface Device | Lectro ComponentsThe DMUX is a selectable output controller designed to expand the output capacity of an energy management or process controller. The DMUX has up to eight output relays which can be individually addressed by a single pulse width modulated input signal. Common (C), Normally Open (NO), and Normally C..

Price: $173.89

]]> ACI | DMUX-8J | Sensor Interface Device | Lectro ComponentsThe DMUX is a selectable output controller designed to expand the output capacity of an energy management or process controller. The DMUX has up to eight output relays which can be individually addressed by a single pulse width modulated input signal. Common (C), Normally Open (NO), and Normally C..

Price: $173.89

]]> <![CDATA[ACI AUD Sensor Interface Device]]> https://www.lectrocomponents.com/aci-aud-sensor-interface-device Fri, 14 Nov 2014 17:51:57 +0000 https://www.lectrocomponents.com/aci-aud-sensor-interface-device ACI | AUD | Sensor Interface Device | Lectro ComponentsThe AUD converts a floating point signal into a linear analog output. There are two inputs on the AUD, one to increase the analog output and one to decrease the analog output. The output of the AUD is stable when the inputs are both off. A contact closure or voltage signal to either input will cau..

Price: $80.00

]]> ACI | AUD | Sensor Interface Device | Lectro ComponentsThe AUD converts a floating point signal into a linear analog output. There are two inputs on the AUD, one to increase the analog output and one to decrease the analog output. The output of the AUD is stable when the inputs are both off. A contact closure or voltage signal to either input will cau..

Price: $80.00

]]> <![CDATA[ACI ATP Sensor Interface Device]]> https://www.lectrocomponents.com/aci-atp-sensor-interface-device Fri, 14 Nov 2014 17:51:56 +0000 https://www.lectrocomponents.com/aci-atp-sensor-interface-device ACI | ATP | Sensor Interface Device | Lectro ComponentsATP Version 1 converts an analog signal into a digital pulse output signal. The user can select eight standard analog input ranges to the ATP by changing jumper shunt positions. To select the output pulse range, the ATP has an eight position DIP switch. The output pulse is continuous with a one se..

Price: $78.00

]]> ACI | ATP | Sensor Interface Device | Lectro ComponentsATP Version 1 converts an analog signal into a digital pulse output signal. The user can select eight standard analog input ranges to the ATP by changing jumper shunt positions. To select the output pulse range, the ATP has an eight position DIP switch. The output pulse is continuous with a one se..

Price: $78.00

]]> <![CDATA[ACI ATL Sensor Interface Device]]> https://www.lectrocomponents.com/aci-atl-sensor-interface-device Fri, 14 Nov 2014 17:51:56 +0000 https://www.lectrocomponents.com/aci-atl-sensor-interface-device ACI | ATL | Sensor Interface Device | Lectro ComponentsThe ATL accepts an analog voltage or current input signal and controls four relays. Each relay has an adjustable trip point which is set by a multi-turn trimmer potentiometer. Each relay is activated when the input signal is equal to or greater than the trip point setting. The relays reactivate wh..

Price: $83.00

]]> ACI | ATL | Sensor Interface Device | Lectro ComponentsThe ATL accepts an analog voltage or current input signal and controls four relays. Each relay has an adjustable trip point which is set by a multi-turn trimmer potentiometer. Each relay is activated when the input signal is equal to or greater than the trip point setting. The relays reactivate wh..

Price: $83.00

]]> <![CDATA[ACI ASA Sensor Interface Device]]> https://www.lectrocomponents.com/aci-asa-sensor-interface-device Fri, 14 Nov 2014 17:51:54 +0000 https://www.lectrocomponents.com/aci-asa-sensor-interface-device ACI | ASA | Sensor Interface Device | Lectro ComponentsThe ASA is an analog signal amplifier which accepts an analog voltage or current signal and outputs a voltage signal. Several preset input ranges are jumper selectable. ASA is designed to give a Building Automation System signal output the power (wattage) to control MaxitrolTM gas valves normally ..

Price: $85.56

]]> ACI | ASA | Sensor Interface Device | Lectro ComponentsThe ASA is an analog signal amplifier which accepts an analog voltage or current signal and outputs a voltage signal. Several preset input ranges are jumper selectable. ASA is designed to give a Building Automation System signal output the power (wattage) to control MaxitrolTM gas valves normally ..

Price: $85.56

]]> <![CDATA[ACI ARM2 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-arm2-sensor-interface-device Fri, 14 Nov 2014 17:51:54 +0000 https://www.lectrocomponents.com/aci-arm2-sensor-interface-device ACI | ARM2 | Sensor Interface Device | Lectro ComponentsThe ARM2 will accept a single analog voltage or current signal and split that signal into two DC non-isolated current sourcing outputs that can be re-scaled. Its primary application is as a signal splitter. The outputs are always scaled identically and will always track each other. The ARM2 can be..

Price: $120.36

]]> ACI | ARM2 | Sensor Interface Device | Lectro ComponentsThe ARM2 will accept a single analog voltage or current signal and split that signal into two DC non-isolated current sourcing outputs that can be re-scaled. Its primary application is as a signal splitter. The outputs are always scaled identically and will always track each other. The ARM2 can be..

Price: $120.36

]]> <![CDATA[ACI ARM Sensor Interface Device]]> https://www.lectrocomponents.com/aci-arm-sensor-interface-device Fri, 14 Nov 2014 17:51:53 +0000 https://www.lectrocomponents.com/aci-arm-sensor-interface-device ACI | ARM | Sensor Interface Device | Lectro ComponentsThe ARM is an analog re-scaling module which accepts an analog voltage or current signal and re-scales it to another voltage or current range. Several preset ranges are jumper selectable. The top-adjust trimmer potentiometers can be used to make fine adjustments to output ranges for maximum flexib..

Price: $100.36

]]> ACI | ARM | Sensor Interface Device | Lectro ComponentsThe ARM is an analog re-scaling module which accepts an analog voltage or current signal and re-scales it to another voltage or current range. Several preset ranges are jumper selectable. The top-adjust trimmer potentiometers can be used to make fine adjustments to output ranges for maximum flexib..

Price: $100.36

]]> <![CDATA[ACI AIM2 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-aim2-sensor-interface-device Fri, 14 Nov 2014 17:51:53 +0000 https://www.lectrocomponents.com/aci-aim2-sensor-interface-device ACI | AIM2 | Sensor Interface Device | Lectro ComponentsThe AIM2 optically isolates the analog (voltage or current) signal to the device being controlled. The AIM2 will accept any input signals between 0 and 20 volts, or 0 and 20 mA, and output any signal within those ranges. The AIM2 has preset or adjustable inputs, and preset or adjustable outputs, t..

Price: $120.00

]]> ACI | AIM2 | Sensor Interface Device | Lectro ComponentsThe AIM2 optically isolates the analog (voltage or current) signal to the device being controlled. The AIM2 will accept any input signals between 0 and 20 volts, or 0 and 20 mA, and output any signal within those ranges. The AIM2 has preset or adjustable inputs, and preset or adjustable outputs, t..

Price: $120.00

]]> <![CDATA[ACI AIM1 Sensor Interface Device]]> https://www.lectrocomponents.com/aci-aim1-sensor-interface-device Fri, 14 Nov 2014 17:51:52 +0000 https://www.lectrocomponents.com/aci-aim1-sensor-interface-device ACI | AIM1 | Sensor Interface Device | Lectro ComponentsThe AIM1 optically isolates an analog voltage or current input signal from its corresponding output signal. The AIM1 is factory calibrated and the output is linear and proportional (1:1 ratio) to the input signal. The AIM1 will accept a 0 to 5 volt, 0 to 10 volt or 0 to 20 mA span input, and outpu..

Price: $111.11

]]> ACI | AIM1 | Sensor Interface Device | Lectro ComponentsThe AIM1 optically isolates an analog voltage or current input signal from its corresponding output signal. The AIM1 is factory calibrated and the output is linear and proportional (1:1 ratio) to the input signal. The AIM1 will accept a 0 to 5 volt, 0 to 10 volt or 0 to 20 mA span input, and outpu..

Price: $111.11

]]> <![CDATA[ACI AFP Sensor Interface Device]]> https://www.lectrocomponents.com/aci-afp-sensor-interface-device Fri, 14 Nov 2014 17:51:51 +0000 https://www.lectrocomponents.com/aci-afp-sensor-interface-device ACI | AFP | Sensor Interface Device | Lectro ComponentsThe AFP allows an analog signal to control a floating point actuator. AFP converts an analog signal into two relay contact outputs (one increase/one decrease). The AFP's isolated floating point output can be controlled by any one of eight analog input signal ranges (using offset jumper). On a loss..

Price: $85.83

]]> ACI | AFP | Sensor Interface Device | Lectro ComponentsThe AFP allows an analog signal to control a floating point actuator. AFP converts an analog signal into two relay contact outputs (one increase/one decrease). The AFP's isolated floating point output can be controlled by any one of eight analog input signal ranges (using offset jumper). On a loss..

Price: $85.83

]]>