ACI AIM1 Sensor Interface Device

The AIM1 optically isolates an analog voltage or current input signal from its corresponding output signal. The AIM1 is factory calibrated and the output is linear and proportional (1:1 ratio) to the input signal. The AIM1 will accept a 0 to 5 volt, 0 to 10 volt or 0 to 20 mA span input, and output any one of those same ranges. The AIM1 can be wired for a voltage or current input signal. The output can be wired for a voltage or current (sink or source) signal. The AIM1 requires one external 24 VAC transformer for power. It has an on-board 24 VAC isolation transformer to supply the isolated output. The unit has LED status indicators for both power supplies.

    View/Download ACI Spec Sheet