ACI A/SCTE-50 Current Sensor

The A/SCTE series Hardware > Tools > Measuring Tools & Sensors > Metal & Voltage Detectors monitor the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear 0 to 5 VDC output signal, which can be monitored by your Building Management, DDC, or PLC controller. In addition, they offer jumper selectable input ranges. The A/SCTE series Hardware > Tools > Measuring Tools & Sensors > Metal & Voltage Detectors are fast acting and extremely accurate from 5% to 10% up to 100% of the FSO (Full Scale Output) depending on the model being ordered. They are factory calibrated using a NIST Traceable standard and shipped with the jumper placed in the largest jumper selectable range. The power for the A/SCTE series current transmitter is induced from the conductor being monitored. This means that no external power supply is necessary for the installation of these sensors. Since these units have a split-core design, they make an excellent choice for existing installations because you will not have to power down the unit and disconnect any wires during the installation process. The A/SCTE-50 current transmitter has jumper selectable ranges of 0-10, 0-20, and 0-50Amps.

    View/Download ACI Spec Sheet